Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
3. Move cursor down to highlight, Configuration address source and press Enter. Select Static.
4. Use Ctrl-h to clear the fields and enter your BMC ip address, Subnet mask and Router IP address (gateway address).
Select Static
5. Press the F4 key to Save the changes and exit the utility.
6. Confirm saving the configuration by selecting Yes and press Enter to boot.
7. Log into the CPU mgmt (DiagOS) console and run the following command:
root@dellemc-diag-os:~# ipmitool lan set 1 ipsrc bios -> this will update the /etc/network/
interfaces file to what you have set in the bios
Upgrade firmware through BMC
17