Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- Contents
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
4. After firmware upgrade completes, enter q to exit.
5. Once all firmware updates are complete, a system power cycle is required either with remote power cycler or manually
unplugging and plugging back the power cord.
NOTE: Please note that the power down state should be minimum of 15 seconds for the complete power drain.
Upgrade firmware through DiagOS 15