Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- Contents
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
Copyright (C) 2013 - 2018 Intel Corporation.
./nvmupdate64e -oem d -u -c nvmupdate.cfg -l nvmupdate.log
Config file read.
Inventory
[00:023:00:00]: Intel(R) Ethernet 10G 4P X710 SFP+ rNDC
Flash inventory started.
Shadow RAM inventory started.
Alternate MAC address is not set.
Shadow RAM inventory finished.
Flash inventory finished.
OROM inventory started.
OROM inventory finished.
Update
[00:023:00:00]: Intel(R) Ethernet 10G 4P X710 SFP+ rNDC
Flash update started.
NVM image verification started.
Shadow RAM image verification started.
Shadow RAM image verification finished.
Flash image verification started.
Flash image verification finished.
NVM image verification finished.
Flash update successful.
OROM update started.
OROM image verification started.
OROM image verification finished.
OROM update successful.
Checking update availability for next tool run.
Reboot is required to complete the update process.
9. Boot into the BIOS settings to check X710 firmware version.
NOTE: Optional, FW-Version can be checked using check X710 FW version from Versa FlexVNF.
26 Upgrade rNDC firmware workaround