Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- Contents
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
Prepare bootable USB with OS ISO image
This section describes the how to prepare a USB key to install the operating system of your choice. For this procedure, you
need a bootable USB. On a Windows PC, use Rufus to burn the bootable USB.
Topics:
• Download Rufus
Download Rufus
1. To download Rufus, go to: https://rufus.akeo.ie
2. Open Rufus and click on SELECT button to load the ISO image from the Windows disks.
3. Plug the USB flash drive into the PC.
8
28 Prepare bootable USB with OS ISO image