Administrator Guide
Table Of Contents
- Dell EMC BIOS User guide
- About this guide
- New in this release
- BIOS
- BIOS setup
- How to boot into BIOS settings after upgrade
- How to retrieve a VEP4600 product service tag
- How to change the default BIOS password
- Password reset
- Hardware flow control
- Super IO configuration
- Boot order
- Server management
- Option ROM dispatch policy
- SR-IOV support
- USB 3.0
- PXE and HTTP boot support
- Network interface configuration
- Advanced power management
- Trusted computing
- Embedded DIAGS
- Dell EMC support
Figure 3. BIOS setup
How to boot into BIOS settings after upgrade
After upgrading BIOS to the latest release
1. Booting into BIOS settings prompts the user to type in BIOS administrator password.
2. The default BIOS administrator password is <servicetag>!
For example if the service tag is:
GWGRG02 then the password is GWGRG02!
NOTE:
Press enter to skip the password. The BIOS enters read-only mode. Many configuration entries become read-
only, not configurable, see the following screenshot.
10 BIOS