Administrator Guide
Table Of Contents
- Dell EMC BIOS User guide
- About this guide
- New in this release
- BIOS
- BIOS setup
- How to boot into BIOS settings after upgrade
- How to retrieve a VEP4600 product service tag
- How to change the default BIOS password
- Password reset
- Hardware flow control
- Super IO configuration
- Boot order
- Server management
- Option ROM dispatch policy
- SR-IOV support
- USB 3.0
- PXE and HTTP boot support
- Network interface configuration
- Advanced power management
- Trusted computing
- Embedded DIAGS
- Dell EMC support
NOTE: The Unified firmware updater retains an admin old password during the Unified firmware updater update by
default if there is a password setup before the update.
NOTE: The Unified firmware updater tool cannot recover the admin user's old password if the user has forgotten it.
Hardware flow control
Hardware flow control is not enabled on the console port by default.
Follow the steps below in BIOS settings to enable the hardware flow control for the console port.
1. Select the Boot menu tab. Boot into the BIOS settings using the up and down arrow keys.
BIOS
17