Administrator Guide
Table Of Contents
- Dell EMC BIOS User guide
- About this guide
- New in this release
- BIOS
- BIOS setup
- How to boot into BIOS settings after upgrade
- How to retrieve a VEP4600 product service tag
- How to change the default BIOS password
- Password reset
- Hardware flow control
- Super IO configuration
- Boot order
- Server management
- Option ROM dispatch policy
- SR-IOV support
- USB 3.0
- PXE and HTTP boot support
- Network interface configuration
- Advanced power management
- Trusted computing
- Embedded DIAGS
- Dell EMC support
Figure 10. Boot order
Server management
VEP4600 has an on-board baseboard management controller (BMC) to monitor system health. During Boot up, the BIOS
communicates with the BMC and exchanges messages with the BMC to log events, get BMC self-test results, and configure
BMC network parameters. To configure BMC to use Static IP or dynamic host configuration protocol (DHCP), use the BIOS. To
access BMC settings, from the BIOS setup screen, select the Server Mgmt tab, then BMC Network Configuration.
Figure 11. Server management
22
BIOS