Administrator Guide
Table Of Contents
- Dell EMC BIOS User guide
- About this guide
- New in this release
- BIOS
- BIOS setup
- How to boot into BIOS settings after upgrade
- How to retrieve a VEP4600 product service tag
- How to change the default BIOS password
- Password reset
- Hardware flow control
- Super IO configuration
- Boot order
- Server management
- Option ROM dispatch policy
- SR-IOV support
- USB 3.0
- PXE and HTTP boot support
- Network interface configuration
- Advanced power management
- Trusted computing
- Embedded DIAGS
- Dell EMC support
Figure 16. PXE and HTTP boot support
Network interface configuration
VEP4600 has two 10GbE small form-factor pluggable plus (SPF+) ports, four Gigabit ports, and one Gigabit management port.
The BIOS uses these ports for PXE boot. You can configure the wake on LAN setting. You can also configure the one Gigabit
port to auto configure or set to a specific speed. Access these settings from the BIOS setup screen, select the Advanced
tab, then select the Intel(R) I350 Gigabit Network Connection, Intel(R) I210 Gigabit Network Connection, or Intel(R)
Ethernet Connection X722 for 10GbE SFP+ settings.
Figure 17. Network interface options
28
BIOS