Install Guide

9. Run the following command to check the version:
[root@localhost]# ethtool -i enp101s0f0
driver: i40e
version: 2.6.12
firmware-version: 6.80 0x80003d74 18.8.9 – (confirmed FW has been updated)
expansion-rom-version:
bus-info: 0000:65:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
Optional commands:
[root@localhost]# rmmod i40e -- (command to remove module)
[root@localhost]# modprobe i40e – (command to add module)
Upgrade rNDC firmware workaround 25