Users Guide
Table Of Contents
- Dell EMC VEP4600 BMC User Guide
- About this guide
- New in this release
- Hardware and software support
- BMC web GUI
- Configuration methods
- Current released firmware
- Remote power cycle system
- Access system health sensors
- Access FRU data
- ipmiutil package
- Dell EMC support
Check this option to enable IPv6 support for the selected interface.
Enable IPv6 DHCP
Check this option to enable IPv6 DHCP to dynamically configure IPv6 address using Dynamic HostConfiguration v6 Protocol
(DHCPv6).
IPv6 Index
Choose the IPv6 Index.
IPv6 Address
Specify a static IPv6 address to be configured for the selected interface.
Subnet Prefix Length
Specify a static IPv6 address to be configured for the selected interface.
● Value ranges from 0 to 128.
Enable VLAN
Check this option to enable VLAN support for the selected interface.
VLAN ID
Specify the Identification for VLAN configuration.
● Value ranges from 1 to 4094.
NOTE: VLAN ID cannot be changed without resetting the VLAN configuration. VLAN ID 0, 4095 are reserved VLAN ID's.
VLAN Priority
Specify the priority for VLAN configuration.
● Value ranges from 0 to 7.
NOTE: 7 is the highest priority for VLAN.
BMC web GUI 17