Users Guide
Table Of Contents
- Dell EMC VEP4600 BMC User Guide
- About this guide
- New in this release
- Hardware and software support
- BMC web GUI
- Configuration methods
- Current released firmware
- Remote power cycle system
- Access system health sensors
- Access FRU data
- ipmiutil package
- Dell EMC support
● First Number must not be 0.
Server address will support the following:
● IPv4/IPV6 Address format.
● ost name format.
Primary SMTP port
Specify the SMTP Port. It is a mandatory field.
● Default port is 25.
● Port value ranges from 1 to 65535.
Primary Secure SMTP port
Specify the SMTP Secure port.
● Default Port is 465.
● Port value ranges from 1 to 65535.
Primary SMTP Authentication
Check the option Enable to enable SMTP Authentication.
NOTE: SMTP Server Authentication types supported are:
● CRAM-MD5
● LOGIN
● PLAIN
Primary Username
Enter the username to access SMTP Accounts.
● User Name can be of length 4 to 64 alpha-numeric characters, dot(.), hyphen(-), and underscore(_).
● It must start with an alphabet.
● Other special characters are not allowed.
Primary password
Enter the password for the SMTP User Account.
● Password must be at least 4 characters long.
● White space is not allowed.
NOTE: This field will not allow more than 64 characters.
Primary SMTP SSLTLS Enable
Check the option Enable to enable SMTP SSLTLS protocol.
Primary SMTP STARTTLS Enable
Check the option Enable to enable SMTP STARTTLS protocol.
Secondary SMTP Support
Check this option to enable Secondary SMTP support for the BMC.
BMC web GUI
25