Users Guide
Table Of Contents
- Dell EMC VEP4600 BMC User Guide
- About this guide
- New in this release
- Hardware and software support
- BMC web GUI
- Configuration methods
- Current released firmware
- Remote power cycle system
- Access system health sensors
- Access FRU data
- ipmiutil package
- Dell EMC support
SNMP Authentication Protocol
Choose an Authentication Protocol for SNMP settings. NOTE: Password field is mandatory, if Authentication protocol is
changed.
SNMP Privacy Protocol
Choose the Encryption algorithm to use for SNMP settings.
Email Format
Check this option to enable IPv6 DHCP to dynamically configure IPv6 address using Dynamic HostConfiguration v6 Protocol
(DHCPv6).
● AMI-Format: The subject of this mail format is Alert from (your Hostname). The mail content shows sensor
information, for example: Sensor type and Description.
● FixedSubject-Format: This format displays the message according to user's setting. You must set the subject and message
for email alert.
Email ID
Enter the email ID for the user. If user forgets the password, new password will be mailed to the configured email ID.
NOTE: SMTP Server must be configured to send the email. Maximum allowed size for Email ID is 64 bytes which includes
username and domain name.
Existing SSH Key
The uploaded SSH key information will be displayed (read-only).
Upload SSH Key
Use Browse button to navigate to the public SSH key file.
● SSH key file should be of pub type.
User management configuration screen
40
BMC web GUI