Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
Power down prompt
2. Remove the USB and start up the system.
NOTE: User required to power on/off device either physically or by using PDU.
Configure BIOS to boot from SSD
1. After the install completes, unplug the USB flash drive from VEP4600. Reboot the system and go into the BIOS settings.
2. In the Boot menu, select Hard Drive BBS Priorities then press Enter.
60
Configure BIOS and install Adva OS