Install Guide
Table Of Contents
- Dell EMC VEP4600 Operating System Installation Guide
- Contents
- VEP4600 overview
- VEP4600 start up and serial console connection
- VEP4600 configuration guidelines
- Update to latest DiagOS
- Upgrade firmware through DiagOS
- Upgrade firmware through BMC
- Upgrade rNDC firmware workaround
- Prepare bootable USB with OS ISO image
- Configure BIOS and install RHEL OS
- Configure BIOS and install Ubuntu OS
- Configure BIOS and install Adva OS
- Configure BIOS and Install ESXi OS
- LTE modem detection
5. Disable Hyper-Threading
a. Tab to Socket Configuration, press Enter on Processor Configuration
b. Scroll down to Hyper-Threading, press Enter and select Disable.
6. Go to the Boot menu, select USB using the up and down arrows for Boot Option #1 and press Enter.
Select USB
7. Press the F4 key to Save the changes and exit the utility.
8. Confirm saving the configuration by selecting Yes and press Enter.
58
Configure BIOS and install Adva OS