Administrator Guide

Boot order
The BIOS looks for a bootable image in the Boot order setting order list. The BIOS then loads and boots the image. To access the boot
order setting, from the
BIOS setup screen, select the Boot tab, then select Boot Option Priorities.
Figure 11. Boot order
Server management
VEP4600 has an on-board baseboard management controller (BMC) to monitor system health. During Boot up, the BIOS communicates
with the BMC and exchanges messages with the BMC to log events, get BMC self-test results, and congure BMC network parameters.
To congure BMC to use Static IP or dynamic host conguration protocol (DHCP), use the BIOS. To access BMC settings, from the BIOS
setup screen, select the Server Mgmt tab, then BMC Network Conguration.
14
BIOS