Administrator Guide

The BIOS also supports hypertext transfer protocol (HTTP) boot. Use both HTTP and PXE boot over IPv4 or IPv6.

Figure 18. PXE and HTTP boot support

Network interface conguration

VEP4600 has two 10GbE small form-factor pluggable plus (SPF+) ports, four Gigabit ports, and one Gigabit management port.

The BIOS uses these ports for PXE boot. You can congure the wake on LAN setting. You can also congure the one Gigabit port to auto

congure or set to a specic speed. Access these settings from the BIOS setup screen, select the Advanced tab, then select the Intel(R)

I350 Gigabit Network Connection, Intel(R) I210 Gigabit Network Connection, or Intel(R) Ethernet Connection X722 for 10GbE SFP+

settings.

BIOS