Administrator Guide
About this guide
This guide provides information for using the Dell EMC baseboard management controller (BMC).
CAUTION: To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this equipment.
WARNING: Only trained and qualied personnel can install this equipment. Read this guide before you install and power up this
equipment. This equipment contains two power cords. Disconnect both power cords before servicing.
WARNING: This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.
Figure 1. Class 1 laser product tag
WARNING: When no cable is connected, visible and invisible laser radiation may be emitted from the aperture of the optical
transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.
Topics:
• Information symbols
• Document revision history
Information symbols
This book uses the following information symbols:
NOTE
: The Note icon signals important operational information.
CAUTION: The Caution icon signals information about situations that could result in equipment damage or loss of data.
WARNING: The Warning icon signals information about hardware handling that could result in injury.
WARNING: The ESD Warning icon requires that you take electrostatic precautions when handling the device.
Document revision history
Table 1. Revision history
Revision Date Description
A00 2018-05 Initial release
A01 2018-08 Hardware ow control addition
A02 2019-02 WIFI/LTE expansion cards, BIOS 3.41.0.9-13, DIAG OS 3.41.3.81-4
1
4 About this guide