Install Guide

Table 1. VEP4600 LED behavior (continued)
LED Description
• Flashing blue with 2 sec on and 1 sec off – system in standby
Temperature status LED
• Off - system off or in standby
• Solid green—temperature is normal
• Solid yellow—temperature is at the limit
• Flashing yellow—temperature is over the limit
RJ-45 Ethernet LED
• Off—no link and no activity detected
• Solid yellow—Link operating at a lower speed
• Solid green—Link operating at a maximum speed—1G
• Flashing green—Port activity
NOTE: Flashing yellow indicates lower than maximum
100M or 10M)
Table 2. System management Ethernet port LEDs
LED Description
Link LED
• Off—No link
• Solid green—Link operating at a maximum speed,
autonegotiated/forced or 1G
• Solid yellow—Link operating at a lower speed, autonegotiated/
forced or 10/100M
Activity LED
• Off—No port activity
• Flashing green—Port activity
Table 3. SFP+ port LEDs
LED Description
Link/Activity LED
• Off—No link
• Solid green—Link operating at maximum speed, 10G
• Solid yellow—Link operating at a lower speed, 1G
• Flashing green—port activity for 10G
• Flashing yellow—port activity for 1G
Expansion card LED behavior
Both system and temperature LEDs are dual-color, green and amber. There are two LEDs on the rNDC front panel:
1. System LED
2. Temperature LED
NOTE: rNDC port LED behavior can be found in their respective datasheets.
10 VEP4600 platform