Install Guide

Figure 16. Platform four-post front installed
5. Align the rear rack rails to the front rail and slide into place.
Figure 17. Rear platform rail
About three inches before you fully insert your platform, the rail locking feature engages to keep the platform from inadvertently sliding
out and falling.
NOTE: Screw the rear rails into rear rack posts to secure them.
Figure 18. Platform four-post rear installed
To remove the platform, unscrew the rack-mounting screws and slide the platform forward.
Optics installation
The VEP4600 has SFP+ optical ports.
For a list of supported optics, see the specification sheets at https://www.dell.com/support or contact your Dell EMC Sales
representative.
CAUTION:
ESD damage can occur if components are mishandled. Always wear an ESD-preventive wrist or heel ground
strap when handling the VEP4600 and components.
22 VEP4600 installation