Install Guide

Specifications

This section lists the VEP4600 specifications.

CAUTION: Operate the product at an ambient temperature not higher than 113°F (45°C).

NOTE: For RoHS information, see Restricted Material Compliance .

Topics:

• Chassis physical design

• IEEE standards

• Safety standards and compliance agency certifications

• Product recycling and disposal

• Agency compliance

Chassis physical design

Table 6. Chassis physical design

Parameter Specifications

Height 1.72 inches (43.6 mm)

Width 17.1 inches (434 mm)

Depth

15 inches (381 mm)

PSU/fan tray handle: 1.57 inches (40 mm)

Chassis weight with factory-installed components

16.40lbs (7.43 kg), (2 PSUs, and 5 fans, 1 rNDC card)

Rack clearance required

Front: 5 inches (12.7 cm)

Back: 5 inches (12.7 cm)

Table 7. Environmental parameters

Parameter Specifications

Operating temperature 0°C to 45°C (32°F to 113°F) continuously

NOTE: Reduce maximum temperature by 1°C/125

meters (1°F/228 feet) above 950 meters (3,117 feet).

Operating humidity 5% to 85% (RH), non-condensing, continuously

5% to 90% (RH), non-condensing, short term

Short term is </= 1% of operational hours per year.

Storage temperature –40°F to 70°C (–40°F to 158°F)

Storage humidity 5% to 95%, non-condensing

Maximum thermal output 311 W = 1024 BTU/Hr

Maximum operational altitude 10,000 feet (3,048 meters)

Maximum non-operational altitude 35,000 feet (10,688 meters)

Shock SV0115 — ODM

34 Specifications