Install Guide
LED behaviors
Figure 4. VEP4600 LEDs
1. Power LED 2. Master LED
3. System LED 4. Locator LED
5. Temperature LED 6. Fan LED
7. SFP+ indicator LED 8. 10/100/1000 BaseT RJ-45 networking link (left) and activity
(right) LEDs
9. 10/100/1000 BaseT RJ-45 networking link (left) and activity
(right) LEDs for the processor (left) and for the BMC (right)
Table 1. VEP4600 LED behavior
LED Description
System Status/Health LED
• Off - system off or in standby
• Solid green—Normal operation
• Flashing green—Booting
• Solid yellow (amber)—Critical system error or CPU power off.
• Flashing yellow—Noncritical system error, fan failure, or power
supply failure
Power LED
• Off - system off or in standby
• Solid Green—Normal operation
• Solid yellow—POST is in process
• Flashing yellow—Power supply failed
Master LED
• Solid green—platform is in stacking Master or Stand alone
mode
• Off - system is slave of the stack or system in standby
FAN LED
• Off - system off or in standby
• Solid green—Normal operation; fan powered and running at
the expected RPM
• Solid yellow—Fan failed
LOCATOR LED/System Beacon
• Off—Locator function disabled
• Flashing blue with 1 sec on and 1 sec off – Locator function
enabled
VEP4600 platform 9