Reference Guide

Board Part Number : 0GRTNKA02
root@dellemc-diag-os:~#
a.
The test option in EEPROM devices allows you to verify the MAC address. Use this test for MAC address consistency.
CLI options
DellEmc Diag - Eeprom Tool
version 1.5, x.xx.x.x-x
build, 2017/05/23,
Syntax:= eepromtool <option>
Display help-text:=
eepromtool --help (or)
eepromtool -h
List the understood TLV codes and names:=
eepromtool --list (or)
eepromtool -l
List all eeprom devices:=
eepromtool --listdevices (or)
eepromtool -L
Dump the PSU eeprom:=
eepromtool --psueepromdump (or)
eepromtool -m
Dump the FAN eeprom:=
eepromtool --faneepromdump (or)
eepromtool -F
Show the EEPROM data:=
eepromtool --eeprom=<eepromtype> --show (or)
eepromtool -P <eepromtype> -x
Reset the EEPROM data:=
eepromtool --eeprom=<eepromtype> --erase (or)
eepromtool -P <eepromtype> -e
Verify the MAC address in system-eeprom and mac-eeprom:=
eepromtool --eeprom=<eepromtype> --test (or)
eepromtool -P <eepromtype> -t
Look up a TLV by code and write the value to stdout:=
eepromtool --eeprom=<eepromtype> --get <code> (or)
eepromtool -P <eepromtype> -g <code>
Execute repeatedly command by count:=
eepromtool --iteration=max/<count> [option1] [option2]... (or)
eepromtool -I max/<count> [option1] [option2]...
Set a TLV code to a value:=
eepromtool --eeprom=<eepromtype> --set <code>=<value>,<code>=<value>...(or)
eepromtool -P <eepromtype> -s <code>=<value>,<code>=<value>...
Usage:=
-h, --h Show the help text
-l, --list List the understood TLV codes and names
-L, --listdevices List all EEPROM devices
-m, --psueepromdump Dump the PSU EEPROM
-F, --faneepromdump Dump the FAN EEPROM
-P, --eeprom= EEPROM type
-x, --show Show operation
-e, --erase Erase operation
-t, --test Test using the pre-programmed configuration or use supplied config
-I, --iteration= Iteration command execution
-g, --get Get operation
-s, --set Set operation
Output
root@dell-diag-os:/opt/ngos/bin# eepromtool --list
TLV Code TLV Name
======== =================
0x21 Product Name
22
Dell EMC DIAG OS tools