Reference Guide

BIOS setup and configuration

This section describes how to access the BIOS setup and configuration screen on your system.

Access the BIOS setup and configuration screen from the command prompt. Ensure that your TFTP server is reachable over your

network.

NOTE: The following output examples are for reference only; your output may vary.

NOTE: The management port IP, FTP server IP address, MAC address, and user-id shown are for illustration purpose

only. Use your system’s applicable values.

Topics:

• Power on VEP4600

• Create a serial console connection

• BIOS access process

Power on VEP4600

Plug in a power cord to the back of VEP4600 platform. The platform starts to power up immediately.

Create a serial console connection

To establish a console connection use a universal serial bus (USB)-to-RS-232 connection from a USB port to a VEP4600 console port.

NOTE: Use a 115200 baud rate.

BIOS setup and configuration 5