Users Guide

User management screen

User management conguration

Username

Enter the name of the new user:

• IP Address consists of four sets of numbers separated by dots as in 'xxx.xxx.xxx.xxx'.

• Each set ranges from 0 to 255.

• First Number must not be 0.

Change Password

Select this option to change the password.

Password Size

Select the Size of the password.

Password

Enter a strong password which consist of atleast one upper case letter, alphanumeric and special characters.

NOTE

: Password is mandatory to be entered while enabling SNMP Access and should have minimum 8 characters when SNMP

status is enabled.

Enable User Access

Check the box to enable user access for the user. Upon enabling the user Access, the IPMI messaging privilege will be assigned to user.

NOTE

: It is recommended that the IPMI messaging option should be enabled for the user to choose the User Access option,

while creating User through IPMI.

Privilege

Select the privilege level assigned to this user when the user accesses BMC through network interface.

There are four levels of Network Privileges:

• User

BMC web GUI