Users Guide

Board Serial : CNDED0081G01GL
Board Part Number : 0GRTNKA02
FRU Device Description : FRU_FAN1 (ID 3)
Unknown FRU header version 0x00
FRU Device Description : FRU_FAN2 (ID 4)
Board Mfg Date : Mon Feb 12 08:01:00 2018
Board Mfg : Dell
Board Product : <
platform>
Board Serial : CNCES008260036
Board Part Number : 07CRC9X01
Product Manufacturer : Dell
Product Name : <platform>
Product Version :
Product Serial :
Product Asset Tag : D4SSG02
For more information, see the IPMI Specication v2.0 chapter 22.26 Set User Access Command, 22.28 Set User Name Command, and
22.30 Set User Password Command.
• Request data byte 1—[7]
– 0b-Do not change the following bits in this byte
– 1b-Enable changing bits in this byte
• Request data byte 1—[6] User restricted to callback
– 0b-User Privilege Limit is determined by the User Privilege Limit parameter for both callback and non-callback connections.
– 1b-User Privilege Limit is determined by the User Privilege Limit parameter for callback connections, but is restricted to Callback
level for non-callback connections. A user can only initiate a callback when he/she 'calls in' to the BMC, but after the callback
connect is made, the user could potentially establish a session as an Operator.
• Request data byte 1—[5] User link authentication enable/disable. This is used to enable/disable a user's name and password
information for link authentication. Link authentication itself is a global setting for the channel and is enabled/disabled via the serial or
moden conguration parameters.
– 0b-disable user for link authentication
– 1b-enable user for link authentication
• Request data byte 1—User IPMI Messaging enable/disable. This is used to enable/disable a user's name and password information for
IPMI messaging. In this case, IPMI Messaging means the ability to execute generic IPMI commands that are not associated with a
particular payload type. For example, if you disable IPMI Messaging for a user, but that user is enabled for activating the SOL payload
type, IPMI commands associated with SOL and session management, such as Get SOL Conguration parameters and Close Session
are available, but generic IPMI commadns such as Get SEL Time are not.
– 0b-disable user for link authentication
– 1b-enable user for link authentication
• Request data byte 2—User ID
– [7:6] reserved
– [5:0] User ID. 00000b = reserved
• Request data byte 3—User limits
– [7:6] reserved
– [3:0] User Privilege Limit. This determines the maximum privilege level that the user can to switch to on the specied channel.
◦ 0h-reserved
◦ 1h-Callback
◦ 2h-User
◦ 3h-Operator
◦ 4h-Adminstrator
◦ 5h-OEM Proprietary
◦ Fh-NO ACCESS
• Request data byte (4)—User Session Limit. Optional—Sets how many simultaneous sessions are activated with the username
associated with the user. If not supported, the username activates as many simultaneous sessions as the implementation supports. If an
attempt is made to set a non-zero value, a CCh "invalid data eld" error returns.
Conguration
methods 55