Users Guide

NOTE: Switch to BMC console to monitor the BMC update status. Conrm BMC updates. Reboot the system. Proceed to BIOS

update.

Use this command to update BMC:

NOTE: This

<BMC_update_lename>

is the le from the USB drive that is

mounted.

#updatetool -D MAIN-BMC -U - e <BMC_update_filename>

You are prompted for conrmation. Press y and enter to continue. When the update is complete, you must powercycle the system.

root@dellemc-diag-os:~# updatetool -D MAIN-BMC -U -e

<BMC_update_lename>

disable preserve BIOS configration

Disable device protect

Disable MAIN-BMC protect operation success, wait HW reset

Write image to MAIN-BMC

INFO: Yafu INI Configuration File not found... Default options will not be applied...

Creating IPMI session via USB...Done

---------------------------------------------

YAFUFlash - Firmware Upgrade Utility (Version 4.112.0)

---------------------------------------------

Image To be updated is (Image-1)

===================================================

Firmware Details

===================================================

RomImage Image 1 Image 2

ModuleName Description Version Version Version

1. boot BootLoader 0.2.000000 0.2.000000 0.2.000000

2. conf ConfigParams 0.20.000000 0.20.000000 0.20.000000

3. root Root 0.20.000000 0.20.000000 0.20.000000

4. osimage Linux OS 0.20.000000 0.20.000000 0.20.000000

5. www Web Pages 0.20.000000 0.20.000000 0.20.000000

6. testapps 0.20.000000 0.20.000000 0.20.000000

7. ast2500e 1.0.000000 1.0.000000 0.20.0

Existing Image and Current Image are Same

So,Type (Y/y) to do Full Firmware Upgrade or (N/n) to exit

Enter your Option : y

****************************************************

WARNING!

FIRMWARE UPGRADE MUST NOT BE INTERRUPTED ONCE IT IS STARTED.

PLEASE DO NOT USE THIS FLASH TOOL FROM THE REDIRECTION CONSOLE.

****************************************************

Uploading Firmware Image : 100%... done

Skipping [boot] Module ....

Flashing [conf] Module ....