Users Guide
Verifying Firmware Image : 100%... done
Flashing [ast2500e] Module ....
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
Resetting the firmware..........
write MAIN-BMC image success
Enable device protect
Update MAIN-BMC image success
root@dellemc-diag-os:~#
Update BIOS in DIAG OS
Use the following DIAG OS command to update BIOS:
NOTE: For updating BIOS and preserving NVRAM(conguration information in BIOS) use the command: updatetool -D BIOS -N
-U -e VEP4600-BIOS-x.xx.x.x-xx.BIN
updatetool -D BIOS -N -U -e ./VEP4600-BIOS-x.xx.x.x-xx.BIN
Use this command to update BIOS:
NOTE: For updating BIOS and preserving NVRAM(conguration information in BIOS) use the
command:
updatetool -D BIOS -N -U -e <VEP4600-BIOS-x.xx.x.x-xx.BIN>
root@dellemc-diag-os:~# updatetool -D BIOS -N -U -e <VEP4600-BIOS-x.xx.x.x-xx.BIN> disable preserve BIOS
configration
00
Disable device protect
Disable BIOS protect operation success, wait HW reset
Write image to BIOS
INFO: Yafu INI Configuration File not found... Default options will not be applied...
Creating IPMI session via USB...Done
-----------------------------------------
YAFUFlash - Firmware Upgrade Utility (Version 4.112.0)
-----------------------------------------
(C)Copyright 2016, American Megatrends Inc.
Beginning BIOS Update...
Uploading Image : 100%... done
Flashing Firmware Image : 100%... done
Verifying Firmware Image : 100%... done
write BIOS image success
Enable device protect
Update BIOS image success
root@dellemc-diag-os:~#
Update CPLD in DIAG OS
Use the following DIAG OS command to update CPLD:
updatetool -D CPLD --index=1 -U -e ./AZUL_CPLD_V0C.vme
Use this command to update CPLD
Firmware upgrades
81