Users Guide

384 CLI
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_CLI_new.fm
DELL CONFIDENTIAL – PRELIMINARY 8/9/16 - FOR PROOF ONLY
Port is off - “out of power budget” during Force On
Communication error with PoE devices after Force On
Port is off – short condition
Port is off – over temperature at the port
Port is off – device is too hot
Unknown device port status
Force Power Error Short Circuit
Force Power Error Channel Over Temperature
Force Power Error Chip Over Temperature
Power Management-Static
Power Management-Static -ovl
Force Power Error Management Static
Force Power Error Management Static -ovl
High power port is ON
Chip Over Power
Force Power Error Chip Over Power
show power inline consumption
Use the show power inline consumption Privileged EXEC mode command to
display information about the inline power consumption for all interfaces or for
a specific interface.
This command is only supported on devices that support PoE.
Syntax
show power inline consumption [interface-id | module stack-member-number]
Parameters
• Interface-id —Specifies an interface ID. The interface ID must be an
Ethernet port.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode