CLI Guide

Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.MemSettings.DimmSlot31 (Read or Write)
Description
"When set to Enabled, the DIMM slot is enabled.n" "When set to Disabled, the DIMM slot is disabled.n"
Legal Values
● "Enabled", "Disabled"
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.MemSettings.DramRefreshDelay (Read or Write)
Description
By enabling the CPU memory controller to delay running the REFRESH commands, you can improve the
performance for some workloads. By minimizing the delay time, it is ensured that the memory controller
runs the REFRESH command at regular intervals. However, this setting does not affect the Intel-based
servers that are configured with DIMMs which use 16 Gb density DRAMs.
Legal Values
● "Performance", "Minimum"
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.MemSettings.FirmwareVersion00 (Read or Write)
Description
The firmware revision of this NVDIMM.
Legal Values None
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.MemSettings.FirmwareVersion01 (Read or Write)
Description
The firmware revision of this NVDIMM.
Legal Values None
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS Attributes 193