CLI Guide

BIOS.NvmeSettings.NvmeMode (Read or Write)
Description
If the system contains NVMe drives that you want to configure in a RAID array, you must set both this
field and the Embedded SATA field on the SATA Settings menu to RAID Mode. You may also need to
change the Boot Mode setting to UEFI. Otherwise, you should set this field to Non-RAID Mode.
Legal Values
● NonRaid
● Raid
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.NVMeSettings.NvmeSettings (Read or Write)
Description
Legal Values
● NA
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.NVMeSettings.NvmeSettingsRef (Read or Write)
Description
This field sets the NVMe drive mode.
Legal Values
● NA
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.OneTimeBoot
You can manage the one time boot settings using the objects in this group.
BIOS.OneTimeBoot.OneTimeBiosBootSeq (Read or Write)
Description
This field determines the one-time boot device when the One-Time Boot Device List is set to BIOS Boot
Sequence Device. If Boot Mode is set to UEFI, the system temporarily switches the Boot Mode to BIOS
when attempting a one-time boot to the device.
Legal Values
● N/A
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
308 BIOS Attributes