CLI Guide

BIOS.SataSettings.SataPortI (Read or Write)
Description
Sets the drive type of the selected device. When the Embedded SATA setting is ATA Mode, set this field
to Auto to enable BIOS support for the device. Select Off to turn off BIOS support for the device. When
the Embedded SATA setting is AHCI Mode or RAID Mode, BIOS always enables support for the device
and this field is read-only.
This attribute is shown if platform supports at least 9 onboard SATA ports. This attribute is grayed out if
Sata Mode is NOT ATA.
Legal Values
● Off
● Auto
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SataSettings.SataPortICapacity (Read or Write)
Description
Indicates the total capacity of a hard-disk drive. This field is undefined for removable-media devices such
as optical drives.
This attribute is supressed if Sata Mode is RAID or the platform supports less than 9 onboard SATA ports.
Legal Values
● N/A
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SataSettings.SataPortIDriveType (Read or Write)
Description
This field indicates type of device attached to this SATA port.
This attribute is supressed if Sata Mode is RAID or the platform supports less than 9 onboard SATA ports.
Legal Values
● N/A
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SataSettings.SataPortIModel (Read or Write)
Description
Indicates the drive model of the selected device.
This attribute is supressed if Sata Mode is RAID or the platform supports less than 9 onboard SATA ports.
Legal Values
● N/A
Default Value Not Applicable
Write Privilege Server Control
358 BIOS Attributes