CLI Guide

NIC.ConfigureFormn.PortNumber (Read Only)
Description
Port that the partition belongs to. Replace n with the number of the partition.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.ConfigureFormn.SVID (Read or Write)
Description
When Switch Dependent Partitioning (SDP) is enabled,each partition will be assigned a pre-set Switch
VLAN Identifier (SVID).The partitions are available for mapping to uplink ports at server I/O Module
(IOM) as part of partition zoning. All packets sent from the switch to the NIC must be S-tagged when in
SDP mode is enabled. Non-tagged packets will be dropped. When SDP is disabled SVID will be greyed out
or disabled. There will be an instance of this attribute for each partition.Replace n with the number of the
partition.The default value shall be number of the partitioning starting from 1001.
Legal Values None
Default Value 1001,1002,1003,1004
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.ConfigureFormn.SVLanId (Read or Write)
Description
Specify the value of the S-VLAN ID to be used by the partition for all traffic when operating in the
Advanced NPar mode. The S-VLAN ID must be unique per partition and in the range from 3 to 4094.
NOTE : This attribute shall only be implemented when Advanced NPar is supported.
Legal Values None
Default Value Partition number + 2
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.ConfigureFormn.VirtFIPMacAddr (Read or Write)
Description
Programmatically assignable FIP-MAC address for FCoE. Virtual addresses written will also generate
corresponding VWWNN and VWWPN addresses as defined in Y741D. Replace n with the number of the
partition. The supported method of reverting to the permanent MAC address is by writing 0's as the
virtual address. If the virtual address has not been set or if it has been cleared by the defined method,
its value shall be returned as 0's. If supported, the current address value should be readable at all times,
irrespective of feature and partition enablement.
Legal Values None
Default Value 00:00:00:00:00:00
Write Privilege None
NIC Attributes 881