CLI Guide

FC.HBAConfig.LinkDownTimeout (Read or Write)
Description
Specifies the number of milliseconds the Fibre Channel uplink port can be offline before the system is
notified that the SAN fabric connectivity is lost and the uplink port is marked as being down
Legal Values None
Default Value 3000
Write Privilege Server Configuration
License Required
Dependency Not Applicable
FC.HBAConfig.LoopResetDelay (Read or Write)
Description
Specifies the Fibre Channel Arbitrated Loop Reset Delay for the port. After resetting the loop, the
adapter firmware refrains from initiating any loop activity for the number of seconds specified in this
setting
Legal Values None
Default Value 5
Write Privilege Server Configuration
License Required
Dependency Not Applicable
FC.HBAConfig.PortDownRetryCount (Read or Write)
Description
Specifies the number of times the Fibre Channel uplink port will try reconnecting to a target port before
the port is marked as being down
Legal Values None
Default Value None
Write Privilege Server Configuration
License Required
Dependency Not Applicable
FC.HBAConfig.PortDownTimeout (Read or Write)
Description
Specifies the timeout in milliseconds that the Fibre Channel uplink port will wait before trying to
reconnect to a target device port before the port is marked as down
Legal Values None
Default Value 3000
Write Privilege Server Configuration
License Required
Dependency Not Applicable
FC Attributes 425