CLI Guide

link speed control is not supported. This setting is only valid when LnkSpeedMethod is set to Manual and
should be greyed out when set to Auto. Note: The speed selection shall only be included if it is supported
in the implementation.
Legal Values
● True
● False
Default Value True
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.LnkSpeedConfig.50Gbps1 (Read or Write)
Description
Speed selector for the specified link speed to be advertised to the link partner for boot protocol
operations and possibly including Wake On LAN and shared LOM management features if separate Vaux
link speed control is not supported. This setting is only valid when LnkSpeedMethod is set to Manual and
should be greyed out when set to Auto. Note: The speed selection shall only be included if it is supported
in the implementation.
Legal Values
● True
● False
Default Value True
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.LnkSpeedConfig.50Gbps2 (Read or Write)
Description
Speed selector for the specified link speed to be advertised to the link partner for boot protocol
operations and possibly including Wake On LAN and shared LOM management features if separate Vaux
link speed control is not supported. This setting is only valid when LnkSpeedMethod is set to Manual and
should be greyed out when set to Auto. Note: The speed selection shall only be included if it is supported
in the implementation.
Legal Values
● True
● False
Default Value True
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.NICConfig
To configure the NICConfig properties, use the objects in this group.
NIC.NICConfig.BannerMessageTimeout (Read or Write)
Description
Timeout in seconds for banner display during POST
NIC Attributes 925