Users Guide
Table Of Contents
- Lifecycle Controllerユーザーズ ガイド
- 目次
- はじめに
- Lifecycle Controller の使用
- Operating system deployment
- 監視
- ファームウェアアップデート
- 設定
- システムコントロールパネルのアクセスオプション
- iDRAC の設定
- システム時刻と日付の設定
- RAID の設定
- ソフトウェア RAID を使用した RAID の設定
- RAID コントローラ上でのセキュアな仮想ディスクの作成
- Key encryption
- ローカルキー暗号化モード
- ミラードライブの解除
- System setup — Advanced Hardware Configuration
- Collect System Inventory On Restart
- ローカル USB ドライブの設定
- NFS および CIFS サーバーの設定
- Conditions while configuring HTTP or HTTPS server
- 保守
- 使いやすいシステムコンポーネント名
- セットアップユーティリティとブートマネージャの使用
- トラブルシューティングとよくあるお問い合わせ(FAQ)
3. 左のナビゲーションペインで、[Local Policies](ローカルポリシー)オプションを展開し、[Security Options](セキュリティオ
プション)を選択します。
4. [Microsoft network server: Digitally sign communications (always)](Microsoft ネットワークサーバー:常に通信にデジタル署名を
行う)オプションをダブルクリックします。
5. [Disabled](無効)を選択し、[OK] をクリックします。
Conditions while configuring HTTP or HTTPS server
While configuring the HTTP or HTTPS servers, ensure that:
● The HTTP servers is configured to the default port 80, whereas HTTPS server is configured to the default port 443. The Lifecycle
Controller web interface accesses the web server using the default port. If the web server is configured to a port other than the
default, Lifecycle Controller cannot access the web server.
● The Apache web server is set as the default web server. Using other web servers may result in unexpected behavior or errors.
For more information about configuring HTTPS server, see the link downloads.dell.com/solutions/dell-management-solution-resources/
14G%20Support%20for%20HTTP%20and%20HTTPS%20across%20iDRAC9%20Interfaces.pdf.
設定 51