Users Guide
Table Of Contents
- Integrated Dell Remote Access Controller 9 用户指南
- 目录
- iDRAC 概览
- 登录 iDRAC
- 强制更改密码 (FCP)
- 使用 OpenID Connect 登录 iDRAC
- 以本地用户、Active Directory 用户或 LDAP 用户身份登录 iDRAC
- 使用智能卡作为本地用户登录 iDRAC
- 使用单一登录登录 iDRAC
- 使用远程 RACADM 访问 iDRAC
- 使用本地 RACADM 访问 iDRAC
- 使用固件 RACADM 访问 iDRAC
- 简单的双重身份验证(简单 2FA)
- RSA SecurID 2FA
- 查看系统运行状况
- 使用公共密钥验证登录 iDRAC
- 多个 iDRAC 会话
- 安全默认密码
- 更改默认登录密码
- 启用或禁用默认密码警告消息
- 密码强度策略
- IP 阻止
- 使用 Web 界面启用或禁用 OS 到 iDRAC 直通
- 使用 RACADM 启用或禁用警报
- 设置受管系统
- 设置 iDRAC IP 地址
- 修改本地管理员帐户设置
- 设置受管系统位置
- 优化系统性能和功耗
- 设置管理站
- 配置支持的 Web 浏览器
- 更新设备固件
- 查看和管理分阶段更新
- 回滚设备固件
- 使用其他系统管理工具监测 iDRAC
- 支持服务器配置配置文件 — 导入和导出
- BIOS 设置或 F2 中的安全引导配置
- BIOS 恢复
- 配置 iDRAC
- 使用 OAuth 2.0 的委派授权
- 查看 iDRAC 和受管系统信息
- 设置 iDRAC 通信
- 配置用户帐户和权限
- 系统配置锁定模式
- 配置 iDRAC 以进行单一登录或智能卡登录
- 配置 iDRAC 以发送警报
- iDRAC 9 Group Manager
- 管理日志
- 在 iDRAC 中监测和管理电源
- iDRAC 直接更新
- 对网络设备执行资源清册、监测和配置操作
- 管理存储设备
- BIOS 设置
- 配置并使用虚拟控制台
- 使用 iDRAC 服务模块
- 使用 USB 端口进行服务器管理
- 使用 Quick Sync 2
- 管理虚拟介质
- 管理 vFlash SD 卡
- 使用 SMCLP
- 部署操作系统
- 使用 iDRAC 排除受管系统故障
- iDRAC 中的 SupportAssist 集成
- 常见问题
- 使用案例场景
Identifier GUID-D26E6F4E-836E-4C6F-947D-18FBE94953FD
Version 2
Status Translation Validated
启用受管系统上的 IPMI
在受管系统上,使用 Dell Open Manage Server Administrator 可启用或禁用 IPMI。有关更多信息,请参阅 OpenManage Server
Administrator
用户指南,网址:
https://www.dell.com/openmanagemanuals。
注: 自 iDRAC v2.30.30.30 或更高版本起,IPMI 对于基于 Linux 的操作系统支持 IPv6 地址协议。
Identifier GUID-112F4FCE-94F5-42EE-93ED-A33E93299328
Version 2
Status Translation Validated
为 RHEL 6 引导期间的串行控制台配置 Linux
以下步骤特定于 Linux GRand Unified Bootloader (GRUB)。如果使用不同的引导加载程序,则需要类似的更改。
注: 在配置客户端 VT100 仿真窗口时,将显示重定向虚拟控制台的窗口或应用程序设置为 25 行 x 80 列以确保文本正确显示。否
则,有些文本屏幕可能会出现乱码。否则,有些文本屏幕可能会出现乱码。
按照以下说明编辑 /etc/grub.conf 文件:
1. 找到文件的常规设置部分并添加以下内容:
serial --unit=1 --speed=57600 terminal --timeout=10 serial
2. 在内核行上追加两个选项:
kernel ............. console=ttyS1,115200n8r console=tty1
3. 禁用 GRUB 的图形界面并使用基于文本的界面。否则,GRUB 屏幕不会显示在 RAC 虚拟控制台中。要禁用图形界面,请注释以
splashimage 开始的行。
以下示例提供了示例 /etc/grub.conf 文件,显示在此过程中说明的更改。
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all
# kernel and initrd paths are relative to /, e.g.
# root (hd0,0)
# kernel /boot/vmlinuz-version ro root=/dev/sdal
# initrd /boot/initrd-version.img
#boot=/dev/sda
default=0
timeout=10
#splashimage=(hd0,2)/grub/splash.xpm.gz
serial --unit=1 --speed=57600
terminal --timeout=10 serial
title Red Hat Linux Advanced Server (2.4.9-e.3smp) root (hd0,0)
kernel /boot/vmlinuz-2.4.9-e.3smp ro root=/dev/sda1 hda=ide-scsi console=ttyS0
console=ttyS1,115200n8r
initrd /boot/initrd-2.4.9-e.3smp.img
title Red Hat Linux Advanced Server-up (2.4.9-e.3) root (hd0,00)
kernel /boot/vmlinuz-2.4.9-e.3 ro root=/dev/sda1 s
initrd /boot/initrd-2.4.9-e.3.im
4. 要启用多个 GRUB 选项来通过 RAC 串行连接启动虚拟控制台会话,将以下行添加到所有选项:
console=ttyS1,115200n8r console=tty1
本例显示 console=ttyS1,57600 添加到了第一个选项。
140 设置 iDRAC 通信
DRAFT