Users Guide
Table Of Contents
- Integrated Dell Remote Access Controller 9 User's Guide
- Contents
- iDRAC 概览
- 登录 iDRAC
- 强制更改密码 (FCP)
- 使用 OpenID Connect 登录 iDRAC
- 以本地用户、Active Directory 用户或 LDAP 用户身份登录 iDRAC
- 使用智能卡作为本地用户登录 iDRAC
- 使用单一登录登录 iDRAC
- 使用远程 RACADM 访问 iDRAC
- 使用本地 RACADM 访问 iDRAC
- 使用固件 RACADM 访问 iDRAC
- 简单的双重身份验证(简单 2FA)
- RSA SecurID 2FA
- 查看系统运行状况
- 使用公共密钥验证登录 iDRAC
- 多个 iDRAC 会话
- 安全默认密码
- 更改默认登录密码
- 启用或禁用默认密码警告消息
- 密码强度策略
- IP 阻止
- 使用 Web 界面启用或禁用 OS 到 iDRAC 直通
- 使用 RACADM 启用或禁用警报
- 设置受管系统
- 设置 iDRAC IP 地址
- 修改本地管理员帐户设置
- 设置受管系统位置
- 优化系统性能和功耗
- 设置管理站
- 配置支持的 Web 浏览器
- 更新设备固件
- 查看和管理分阶段更新
- 回滚设备固件
- 使用其他系统管理工具监测 iDRAC
- 支持服务器配置配置文件 — 导入和导出
- BIOS 设置或 F2 中的安全引导配置
- BIOS 恢复
- 配置 iDRAC
- 使用 OAuth 2.0 的委派授权
- 查看 iDRAC 和受管系统信息
- 设置 iDRAC 通信
- 配置用户帐户和权限
- 系统配置锁定模式
- 配置 iDRAC 以进行单一登录或智能卡登录
- 配置 iDRAC 以发送警报
- iDRAC 9 Group Manager
- 管理日志
- 在 iDRAC 中监测和管理电源
- iDRAC 直接更新
- 对网络设备执行资源清册、监测和配置操作
- 管理存储设备
- BIOS 设置
- 配置并使用虚拟控制台
- 使用 iDRAC 服务模块
- 使用 USB 端口进行服务器管理
- 使用 Quick Sync 2
- 管理虚拟介质
- 管理 vFlash SD 卡
- 使用 SMCLP
- 部署操作系统
- 使用 iDRAC 排除受管系统故障
- iDRAC 中的 SupportAssist 集成
- 常见问题
- 使用案例场景
Lifecycle Controller 数据选项将擦除任何内容,例如 LC 日志、配置数据库、回滚固件、出厂附带日志以及 FP SPI(或管理提升
板)中的配置信息。
注: Lifecycle Controller 日志包含有关系统擦除请求的信息,以及在 iDRAC 重启时生成的任何信息。所有之前的信息都会删
除。
您可以使用 SystemErase 命令删除单个或多个系统组件:
racadm systemErase <BIOS | DIAG | DRVPACK | LCDATA | IDRAC >
其中,
● BIOS - BIOS 重设为默认值
● DIAG - 嵌入式诊断程序
● DRVPACK - 嵌入式操作系统驱动程序包
● LCDATA - 清除 Lifecycle Controller 数据
● iDRAC - iDRAC 重设为默认值
● overwritepd —覆盖不支持即时安全擦除 (ISE) 的硬盘驱动器
● percnvcache — 重设控制器高速缓存
● vflash — 重设 vFLASH
● secureerasepd — 擦除支持 ISE 的硬盘驱动器、SSD 和 NVMes
● allapps — 清除所有操作系统应用程序
注: 擦除 vFlash 时,请确保在执行操作之前已分离 vFlash 卡上的所有分区。
注: 如果服务器上已启用 SEKM,则在使用此命令之前,请使用 racadm sekm disable 命令禁用 SEKM。如果通过执行
此命令从 iDRAC 中擦除了 SEKM 设置,则这可以避免被 iDRAC 保护的所有存储设备被锁定。
有关更多信息,请参阅 iDRAC RACADM CLI
指南
,网址:https://www.dell.com/idracmanuals。
注: Dell 技术中心链接显示在 Dell 品牌系统上的 iDRAC GUI 中。如果您使用 WSMan 命令擦除系统数据,然后想该链接再次
出现,请手动重新引导主机,并等待 CSIOR 运行。
注: 您运行系统擦除后,VD 可能仍然会显示。完成系统擦除并重新引导 iDRAC 后,运行 CSIOR。
将 iDRAC 重设为出厂默认设置
您可以使用 iDRAC 设置公用程序或 iDRAC Web 界面将 iDRAC 重设为出厂默认设置。
使用 iDRAC Web 界面将 iDRAC 重设为出厂默认设置
要使用 iDRAC Web 界面将 iDRAC 重设为出厂默认设置,请执行以下操作:
1. 转至 Maintenance(维护) > Diagnostics(诊断程序)。
随即会显示 Diagnostics Console(诊断控制台)页面。
2. 单击 Reset iDRAC to Default Settings(将 iDRAC 重设为默认设置)。
完成状态以百分比显示。iDRAC 将重新引导并还原至出厂默认设置。iDRAC IP 将重设且不可访问。您可以使用前面板或
BIOS 配置 IP。
使用 iDRAC 设置公共程序将 iDRAC 重设为出厂默认设置
要使用 iDRAC 设置公用程序将 iDRAC 重设为出厂默认值,请执行以下操作:
1. 转至 Reset iDRAC configurations to defaults(将 iDRAC 配置重设为默认值)。
此时将显示 iDRAC Settings Reset iDRAC configurations to defaults(iDRAC 设置将 iDRAC 配置重设为默认值)页面。
2. 单击是。
iDRAC 重设启动。
3. 单击 Back(上一步)导航至同一 Reset iDRAC configurations to defaults(将 iDRAC 配置重设为默认值)页面,查看成
功消息。
314
使用 iDRAC 排除受管系为故障