Administrator Guide

Table Of Contents
cfgSerialSshEnable (Read or Write)
Table 175. Details of cfgSerialSshEnable
Description
Enables or disables the secure shell (SSH) interface.
Legal Values
1 (TRUE)
0 (FALSE)
Default
1
Example
racadm get -g cfgSerial
cfgSerialBaudRate=115200
cfgSerialConsoleEnable=1
cfgSerialConsoleQuitKey=^\
cfgSerialConsoleIdleTimeout=1800
cfgSerialConsoleNoAuth=0
cfgSerialConsoleCommand=
cfgSerialConsoleColumns=0
cfgSerialHistorySize=8192
cfgSerialSshEnable=1
cfgOobSnmp
This group contains parameters to configure the SNMP agent and trap capabilities of iDRAC. One instance of the group is
allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2 and the Dell enterprise-specific the MIB.
This group is not applicable for iDRAC on Rack and Tower Servers.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read or Write)
Table 176. Details of cfgOobSnmpAgentCommunity
Description
Specifies the SNMP Community Name used for SNMP traps. The community string acts as a password
shared between different hosts over the network. This community string value must match with the other
hosts for any kind of communication through SNMP.
Legal Values
A string of up to 31 characters.
Default
public
Example
racadm get -g cfgOobSnmp
cfgOobSnmpTrapsEnable=1
cfgOobSnmpAgentCommunity=public
iDRAC Property Database Group and Object Descriptions
181