CLI Guide

Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiGenParams.IpVer (Read or Write)
Description
Setting displays and allows configuration of the IP version used by iSCSI initiator and targets (Initiator
only when a seperate target ipver is implemented). If only one IP version is supported, this attribute
should be set to that version and be made Read Only.
Legal Values
● IPv4
● IPv6
● None
Default Value IPv4
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiGenParams.IscsiTgtBoot (Read or Write)
Description
Boot to iSCSI target after connection.
Legal Values
● Enabled
● Disabled
● One Time Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiGenParams.IscsiViaDHCP (Read or Write)
Description
Setting to enable acquisition of iSCSI target parameters from DHCP.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
912 NIC Attributes