Manualshelf

Users Guide

ManualsBrandsDell ManualsAlienwareOEMR R640
191192193194195196197198199200
Table Of Contents
使用 RACADM 监测 FC HBA 设备
要使用 RACADM 查看 FC HBA 设备信息，请使用 hwinventory 命令。
有关更多信息，请参阅 iDRAC RACADM CLI
指南
，网址：https://www.dell.com/idracmanuals。
Inventorying and monitoring SFP Transceiver devices
You can remotely monitor the health and view the inventory of SFP transceiver devices connected to the system. Following are the
supported transceivers:
● SFP
● SFP+
● SFP28
● SFP-DD
● QSFP
● QSFP+
● QSFP28
● QSFP-DD
● Base-T modules
● AOC & DAC cables
● RJ-45 Base-T connected with Ethernet
● Fiber channel
● IB adapter ports
Most useful transceiver information are Serial number and Part number from transceiver EPROM. These would allow to verify the
remotely installed transceivers, when troubleshooting connectivity issues. For each SFP Transceiver device, you can view the following
information for the ports:
● Vendor Name
● Part Number
● Revision
● Serial Number
● Device Identifier
● Interface Type
Monitoring SFP Transceiver devices using web interface
To view the SFP Transceiver device information using Web interface, go to System > Overview > Network Devices and click on
particular device. For more information about the displayed properties, see iDRAC Online Help.
The page name also displays the slot number where the transceiver device is available under Port statistics.
Monitoring data for SFP devices is only available for active SFPs. Following are the information displayed:
● TX Output Power
● TX Bias Current
● RX Input Power
● Vcc Voltage
● Temperature
Monitoring SFP Transceiver devices using RACADM
To view the SFP Transceiver device information using RACADM, use the networktransceiverstatistics command.
For more information, see the iDRAC RACADM CLI
指南
，网址：https://www.dell.com/idracmanuals.
192 对网络设备执行资源清册、监测和配置操作