Users Guide

Tableau 10. Types de fichiers d'image et dépendances
Image .D9 DUP des iDRAC
Interface Pris en charge Activation de
Lifecycle
Controller
nécessaire
Pris en charge Activation de Lifecycle Controller
nécessaire
Utilitaire BMCFW64.exe Oui Non Non S/O
Mise à jour du
micrologiciel RACADM
(ancienne)
Oui Non Non S/O
Mise à jour RACADM
(nouvelle)
Oui Oui Oui Oui
Interface utilisateur des
iDRAC
Oui Oui Oui Oui
WS-MAN Oui Oui Oui Oui
DUP du système
d'exploitation intrabande
Non S/O Oui Non
Compatibilité des versions
La fonctionnalité de compatibilité des versions vous permet de mettre à jour les versions des micrologiciels des composants qui sont
compatibles avec les composants du système. En cas de problèmes de compatibilité, le contrôleur Lifecycle Controller affiche des
messages d’erreur de mise à niveau ou de mise à niveau vers une version antérieure au cours de la mise à jour.
Updating firmware
You can update to the latest version of Lifecycle Controller using the Firmware Update wizard. It is recommended that you run the
Firmware Update wizard regularly to access the latest updates. You can update the component firmware by either using update
repositories or individual DUPs—single component DUP.
NOTE:
● The firmware for iDRAC and Lifecycle Controller is combined in a single package.
● Make sure that the file name for the single component DUPs does not have any blank space.
● If Collect System Inventory On Restart (CSIOR) is disabled while performing an update, Lifecycle Controller automatically updates
the system inventory.
● Both 32–bit and 64–bit DUPs and catalog are supported. If both the 32-bit and 64-bit DUPs are available in a catalog, the 64-bit
DUP is preferred for the firmware update. 32-bit DUP is used for firmware update only when 64-bit DUP is not available in a
catalog.
● When you check for updates, all compatible versions are listed. Before you install the update, ensure that you select the latest
available version and also ensure that it is newer than the version currently installed. If you want to control the version that iDRAC
detects, create a custom repository using Dell Repository Manager (DRM) and configure iDRAC to use that repository to check
for updates.
NOTE:
● When SEKM mode is enabled on a controller, iDRAC Firmware downgrade/upgrade shall fail when tried from a SEKM to a
non-SEKM iDRAC version. iDRAC Firmware upgrade/downgrade shall pass when done within the SEKM versions.
● PERC firmware downgrade to a non-SEKM version shall fail when SEKM encryption mode is enabled on PERC controller.
● SEKM functionalities require iDRAC Datacenter or Enterprise license with SEKM license.
To update the firmware:
1. Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.
2. In the left pane, click Firmware Update.
32
mise à jour de firmware