Users Guide
Table Of Contents
- Integrated Dell Remote Access Controller 9 User's Guide
- Contents
- iDRAC 概览
- 登录 iDRAC
- 强制更改密码 (FCP)
- 使用 OpenID Connect 登录 iDRAC
- 以本地用户、Active Directory 用户或 LDAP 用户身份登录 iDRAC
- 使用智能卡作为本地用户登录 iDRAC
- 使用单一登录登录 iDRAC
- 使用远程 RACADM 访问 iDRAC
- 使用本地 RACADM 访问 iDRAC
- 使用固件 RACADM 访问 iDRAC
- 简单的双重身份验证(简单 2FA)
- RSA SecurID 2FA
- 查看系统运行状况
- 使用公共密钥验证登录 iDRAC
- 多个 iDRAC 会话
- 安全默认密码
- 更改默认登录密码
- 启用或禁用默认密码警告消息
- 密码强度策略
- IP 阻止
- 使用 Web 界面启用或禁用 OS 到 iDRAC 直通
- 使用 RACADM 启用或禁用警报
- 设置受管系统
- 设置 iDRAC IP 地址
- 修改本地管理员帐户设置
- 设置受管系统位置
- 优化系统性能和功耗
- 设置管理站
- 配置支持的 Web 浏览器
- 更新设备固件
- 查看和管理分阶段更新
- 回滚设备固件
- 使用其他系统管理工具监测 iDRAC
- 支持服务器配置配置文件 — 导入和导出
- BIOS 设置或 F2 中的安全引导配置
- BIOS 恢复
- 配置 iDRAC
- 使用 OAuth 2.0 的委派授权
- 查看 iDRAC 和受管系统信息
- 设置 iDRAC 通信
- 配置用户帐户和权限
- 系统配置锁定模式
- 配置 iDRAC 以进行单一登录或智能卡登录
- 配置 iDRAC 以发送警报
- iDRAC 9 Group Manager
- 管理日志
- 在 iDRAC 中监测和管理电源
- iDRAC 直接更新
- 对网络设备执行资源清册、监测和配置操作
- 管理存储设备
- BIOS 设置
- 配置并使用虚拟控制台
- 使用 iDRAC 服务模块
- 使用 USB 端口进行服务器管理
- 使用 Quick Sync 2
- 管理虚拟介质
- 管理 vFlash SD 卡
- 使用 SMCLP
- 部署操作系统
- 使用 iDRAC 排除受管系统故障
- iDRAC 中的 SupportAssist 集成
- 常见问题
- 使用案例场景
GPU(加速器)
IDRAC GUI 中 CPU/加速器下的加速器部分灰显。
当 Redfish 中的相应属性被禁用时,GUI 中的少数页面可能不会显示预期响应。
iDRAC 服务模块
某些 PowerEdge 服务器的 iDRAC GUI 页面中的 iSM 详细信息缺失/未正确更新
当用户在分组下添加子 NIC 时,配置无效。这将导致 iSM 无法正确地与 iDRAC 通信。
在安装或运行 iDRAC Service Module 前,是否应卸载 OpenManage Server Administrator?
否,您不需要卸载 Server Administrator。在安装或运行 iDRAC Service Module 之前,请确保已停止 iDRAC Service Module 提
供的 Server Administrator 功能。
如何检查主机操作系统中是否已安装 iDRAC Service Module?
要确定系统中是否已安装 iDRAC Service Module,
● 在运行 Windows 的系统上:
打开控制面板,验证 iDRAC Service Module 是否列于已安装程序的列表中。
● 在运行 Linux 的系统上:
运行命令 rpm —qi dcism。如果已安装 iDRAC Service Module,显示的状态将是已安装。
● 在运行 ESXi 的系统上,在主机上运行命令 esxcli software vib list|grep -i open。此时将显示 iDRAC Service
Module。
注: 要检查 Red Hat Enterprise Linux 7 上是否安装了 iDRAC Service Module,请使用 systemctl status
dcismeng.service 命令,而非 init.d 命令。
如何检查系统中安装的 iDRAC Service Module 的版本号?
要检查系统中的 iDRAC Service Module 的版本,请执行以下任一操作:
● 依次单击开始 > 控制面板 > 程序和功能。已安装 iDRAC Service Module 的版本将列在版本选项卡中。
● 转至我的电脑 > 卸载或更改程序。
安装 iDRAC 服务模块所需的最低权限级别是什么?
要安装 iDRAC Service Module,您必须具有管理员级别的权限。
在 iDRAC Service Module 2.0 版及更早版本中,在安装 iDRAC Service Module 时,将显示错误消息,指出此服务器不受支
持。有关受支持的服务器的更多信息,请参阅《用户指南》。如何解决此错误?
安装 iDRAC Service Module 之前,请确保服务器是第 12 代 PowerEdge 服务器或更高版本。此外,确保您使用的是 64 位系
统。
在操作系统日志中将显示以下消息,即使已正确配置“基于 USBNIC 的 OS 到 iDRAC 直通”功能也是如此。为什么?
The iDRAC Service Module is unable to communicate with iDRAC using the OS to iDRAC Pass-through channel
iDRAC Service Module 使用基于 USB NIC 功能的 OS 到 iDRAC 直通,建立与 iDRAC 的通信。有时,尽管 USB NIC 接口配置了
正确的 IP 端点,但通信仍未建立。当主机操作系统路由表具有同一个目标掩码的多个条目以及 USB NIC 目标未列为路由顺序的
第一个目标时,可能会出现这种情况。
表. 64: 布线顺序示例
目标 网关 网络掩码 标志 度量指标 参考 使用接口
默认值 10.94.148.1 0.0.0.0 UG 1024 0 0 em1
10.94.148.0 0.0.0.0 255.255.255.0 U 0 0 0 em1
link-local 0.0.0.0 255.255.255.0 U 0 0 0 em1
link-local 0.0.0.0 255.255.255.0 U 0 0 0 enp0s20u12u3
328 常为为为