Users Guide

Disabling access to modify iDRAC configuration
settings on host system
You can disable access to modify the iDRAC configuration settings through Local RACADM or iDRAC Settings utility. However,
you can view these configuration settings. To do this:
1. In iDRAC Web interface, go to iDRAC Settings > Services > Local Configurations.
2. Select one or both of the following:
● Disable the iDRAC Local Configuration using iDRAC Settings — Disables access to modify the configuration
settings in iDRAC Settings utility.
● Disable the iDRAC Local Configuration using RACADM — Disables access to modify the configuration settings in
Local RACADM.
3. Click Apply.
NOTE: If access is disabled, you cannot use Server Administrator or IPMITool to perform iDRAC configurations.
However, you can use IPMI Over LAN.
Configuring iDRAC 111