Users Guide

show -l all -output format=clpxml /admin1/system1/logs1/log1
Usage examples
This section provides use case scenarios for SMCLP:
● Server power management on page 323
● SEL management on page 323
● Map target navigation on page 324
Server power management
The following examples show how to use SMCLP to perform power management operations on a managed system.
Type the following commands at the SMCLP command prompt:
● To switch off the server:
stop /system1
The following message is displayed:
system1 has been stopped successfully
●
To switch on the server:
start /system1
The following message is displayed:
system1 has been started successfully
● To reboot the server:
reset /system1
The following message is displayed:
system1 has been reset successfully
SEL management
The following examples show how to use the SMCLP to perform SEL-related operations on the managed system. Type the
following commands at the SMCLP command prompt:
● To view the SEL:
show/system1/logs1/log1
The following output is displayed:
/system1/logs1/log1
Targets:
Record1
Record2
Record3
Record4
Record5
Properties:
InstanceID = IPMI:BMC1 SEL Log
MaxNumberOfRecords = 512
CurrentNumberOfRecords = 5
Name = IPMI SEL
Using SMCLP
323