Owner's Manual

Setting Up Dell Online Diagnostics 13
NOTE: Fibre Channel Controller enumeration and tests are not supported on 64-bit
Linux operating systems.
NOTE: Memory diagnostics are not supported on the following Dell systems
as they do not support IPMI: SC420, SC430, SC440, SC1420, SC1430, and T105.
Setting Up Diagnostics
The Online Diagnostics installation files, for Microsoft Windows and
Linux operating systems, are available at the Dell Support website at
support.dell.com.
Emulex
Fibre
Channel
Controller
Linux operating
system
1. HBAnywhere utility from
Emulex. To download this
utility, access the Emulex
website at www.emulex.com.
Click Downloads Dell.
Click the adapter model
number. Click Linux from the
Current Drivers section and
download the Applications
Kit.
2. Install libhbaapi rpm
available in the operating
system DVD.
Fibre Channel
Controllers are not
enumerated and
diagnostics tests will
not be available.
QLogic
Fibre
Channel
Controller
Linux operating
system
1. SNIA API for Linux drivers.
To download this, access the
QLogic website at
www.qlogic.com. Click
Downloads Fibre Channel
Adapters. Select a model and
an operating system and click
Go.
2. Install libhbaapi rpm
available in the operating
system DVD.
Fibre Channel
Controllers are not
enumerated and
diagnostics tests will
not be available.
Table 2-1. Device Dependencies
(continued)
Device Operating
System
Dependency Default Behavior (if
dependency is not met)