Owner's Manual

Using Dell Online Diagnostics 19
Select All: Click this button to select all the devices and tests displayed in the
Select Test(s) to Run pane.
Remove All: Click this button to remove all the selected devices and tests in the
Select Test(s) to Run pane.
Select Test(s) to Run
Use this section to select the devices and tests to be executed. The section is
organized according to the option you selected in the Selection Options list box.
If the display is grouped by devices:
• Select the check box next to the device, to select all the tests listed
for the device.
• You can also expand the device node and select individual tests that
you want to run.
If the display is grouped by tests:
• Select the check box next to the test, to select all the devices listed for
the test.
• You can also expand the test node and select the individual devices on
which you want to run the tests.
NOTE: You can select a device in the Diagnostic Information section, and view its
corresponding configuration details highlighted in the Configuration tab.
Diagnostic Information
Use this section to view the system configuration and operational status
information. In addition, you can run selected tests and view the results
of these tests.
Indicates a device.
Indicates a device with a non-critical error or associated warning.
Indicates a test.
Indicates a test with a non-critical error or warning associated.
A test warning message is displayed on mouseover.