Owner's Manual

20 Using Dell Online Diagnostics
Configuration
Use this tab to view the operational status of the detected devices and their
configuration details. To view the configuration details for a device, select the
device from the Select Test(s) to Run pane. The configuration details of the
selected device are highlighted in this page and are listed under the
following headings:
Device Name: The name of the device.
Device Attribute: Lists the device attributes. The following are the device
attributes.
Val ue : Specifies a value against each attribute of a device.
Additional Device Information: Provides additional information of a device,
if available, under the Configuration tab. When an additional device is
available, the information icon appears next to the device name in the
Configuration tab. Double-click the row to view additional information for
the device. See "Appendix" for more information.
Status Specifies the operational status of the device.
Description Specifies a brief description.
Class Specifies the class to which the device belongs. For example,
the device COM1 belongs to the class Serial Port.
Location Specifies the location of the device in the system. For example,
system board.
Additional
Information
Specifies any additional information. For example, if the
device is embedded on the system board, the value Embedded
is displayed against this field.