Owner's Manual

22 Using Dell Online Diagnostics
• Status: Indicates the current status of a test. Double-click on a test item to
view details that include device name, device description, device location,
test name, and test description. The following text indicators specify the
test status:
•
Result: Specifies the result of a test in the form of symbols. For example,
the
Status column of a test might display Completed , but the Result
column specifies whether the test completed successfully. Double-click
a result item to view details such as device name, device description,
device location, test name, test description, and the overall result of the test.
The following table describes the various icons and the test result
indicators they represent:
Result
Use this tab to view the results of the tests executed along with a brief
description about the outcome of each test.
Completed Specifies that the test has completed.
Suspended Specifies that the test was suspended. You can suspend a test
manually only. Not all diagnostic tests support the Suspend feature.
Aborted Specifies that the test was aborted. You can abort a test manually
only. Not all diagnostic tests support the Abort feature.
Executing Specifies that the test is running.
Ready Specifies that the test has not started but is queued up for
execution. You can abort any test when it is in the Ready state.
The test completed successfully.
The test is being executed.
The test was aborted.
Non-critical errors were encountered during the execution of the test.
The test failed.
The test was suspended.