Owner's Manual

Setting Up Dell Online Diagnostics 13
NOTE: Fibre Channel Controller enumeration and tests are not supported on 64-bit
Linux operating systems.
NOTE: Memory diagnostics are not supported on the following Dell systems
as they do not support IPMI: SC420, SC430, SC440, SC1420, SC1430, and T105.
NOTE: For supported operating systems, see the Dell Online Diagnostics Version
2.19 Readme. To access the Readme, on support.dell.com/manuals, click
Software→ Serviceability Tools→ Dell Online Diagnostics.
Broadcom
NIC
Red Hat
Enterprise
Linux and
SUSE Linux
Enterprise
Server
bnx2 driver version 1.4.51
or greater.
tg3 driver version 3.71 or greater.
NOTE: Broadcom NIC Test, NIC
Communication Test, and NIC Team
Test are not supported on Red Hat
Enterprise Linux 6 server (64-bit).
Online Diagnostics
GUI may not
function properly.
Emulex
Fibre
Channel
Controller
Linux operating
system
1. HBAnywhere utility from
Emulex. To download this utility,
access the Emulex website at
emulex.com. Click Downloads →
Dell. Click the adapter model
number. Click Linux from the
Current Drivers section and
download the Applications Kit.
2. Install libhbaapi rpm available in
the operating system DVD.
Fibre Channel
Controllers are not
enumerated and
diagnostics tests are
not available.
QLogic
Fibre
Channel
Controller
Linux operating
system
1. SNIA API for Linux drivers. To
download this, access the QLogic
website at qlogic.com. Click
Downloads → Fibre Channel
Adapters. Select a model and an
operating system and click Go.
2. Install libhbaapi rpm available in
the operating system DVD.
Fibre Channel
Controllers are not
enumerated and
diagnostics tests are
not available.
Table 2-1. Device Dependencies
(continued)
Device Operating
System
Dependency Default Behavior (if
dependency is not
met)