Owner's Manual

Using Dell Online Diagnostics 25
Result
Use this tab to view the results of the tests executed along with a brief
description about the outcome of each test.
The Result column in this tab briefly describes the test outcome. In addition,
you can double-click anywhere in the row to view the corresponding result
message. For example, if a test failed, the Result column will display the
problem encountered and any actions you must take.
Right-click to bring up the Delete/Delete All Completed menu. Select
Delete to remove the test results of an individual test and Delete All
Completed to remove all test results of all completed tests from the Status
tab and the Results tab.
Running Diagnostic Tests
To run diagnostic tests, perform the following steps:
1
Launch the application.
2 In the Diagnostic Selection section on the left, select the appropriate
option from the
Selection Options drop-down menu.
• Select the
Group by connection option to view the connections as
nodes with the corresponding devices and tests displayed under each
connection.
• Select the
Group by device option to list the system devices. All
available tests for each device are displayed under the device.
NOTE: If a device is grayed out, the device does not have any tests available.
Configuration information for this device is displayed in the Configuration tab .
• Select the Group by test option to list all the available tests with the
corresponding devices displayed under each test.